乐动体育登录乔迪实验室擅长分析显示测试to globally-recognized specifications. We can help you complete essential materials studies focused on physical properties testing, particle size analysis, gel content, and more. Our experienced team of Ph.D. chemists has a suite of advanced techniques at their fingertips, enabling fully-comprehensive interrogations of materials under study. We can subsequently provide precise, routine testing according to specific standards, such as ASTM D, ASTM E, and ASTM F regulations.
ASTM International standards are designated with a specific prefix which denotes the broad scope of the standard. For instance:
- ASTM D refers to miscellaneous materials
- ASTM E refers to miscellaneous subjects
- ASTM F是指预定申请的材料
At Jordi Labs, we perform testing to hundreds of different ASTM regulations that typically fall under these three designations. We are adept in selecting manual methods of particle size analysis for soil sediments according toASTM D422– 63。Our chemists can determine the thermal stability of your sample via thermogravimetry according toASTM E2550 – 17。这些仅选择了我们可以遵守的标准，作为我们先进的分析测试服务的一部分。
Contact今天，乔迪实验室团队的成员学习如乐动体育登录何帮助您满足严格的规格。查看全范围的ASTMld乐动官网 standards that we can comply with, browse the table below:
| 斯坦dard | 类别 | 描述 |
|---|---|---|
| ASTM 1120 | ASTM | 斯坦dard Test Method for Boiling Point of Engine Coolants |
| ASTM 2214-02 | ASTM | 原位测定的标准试验方法Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| ASTM 2605 | ASTM | 标准测试方法，用于通过尺寸排除色谱法确定藻酸钠的摩尔质量，并具有多角度光散射检测 |
| ASTM 3148 | ASTM | 单轴压缩中完整岩石标本的弹性模量的标准测试方法 |
| ASTM 3418 | ASTM | 通过差扫描量热法的过渡温度和聚合物结晶的过渡温度和焓的标准测试方法 |
| ASTM B923 | ASTM | 斯坦dard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry |
| ASTM C1749 | ASTM | 斯坦dar Guide for Measurment of the Rheological Properties of Hyraulic Cementious Paste Using a Rotational Rheometer |
| ASTM C25-31 | ASTM | 斯坦dard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime |
| ASTM C518 | ASTM | 斯坦dard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM D 217-02 | ASTM | 斯坦dard Test Methods for Cone Penetration of Lubricating Grease |
| ASTM D 301 | ASTM | 斯坦dard Test Methods for Soluble Cellulose Nitrate |
| ASTM D1003 | ASTM | 斯坦dard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D1004 | ASTM | 斯坦dard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D1042 | ASTM | 斯坦dard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
| ASTM D1078 | ASTM | 斯坦dard Test Method for Distillation Range of Volatile Organic Liquids |
| ASTM D1125 | ASTM | 斯坦dard Test Methods for Electrical Conductivity and Resistivity of Water |
| ASTM D1149 | ASTM | 斯坦dard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D117 | ASTM | 斯坦dard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids |
| ASTM D1177 | ASTM | 斯坦dard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D1209 | ASTM | 斯坦dard Test Method for Color of Clear Liquids |
| ASTM D1238 | ASTM | 斯坦dard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
| ASTM D1269 | ASTM | Method of Test for Lead Antiknock Compounds in Gasoline |
| ASTM D1287 | ASTM | 斯坦dard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D1298 | ASTM | 标准测试方法，用于通过比重计方法的原油石油和液体石油产物的密度，相对密度或API重力 |
| ASTM D1335 | ASTM | 斯坦dard Test Method for Tuft Bind of Pile Yarn Floor Coverings |
| ASTM D1403 | ASTM | 斯坦dard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment |
| ASTM D1434 | ASTM | 斯坦dard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D1439 | ASTM | 斯坦dard Test Methods for Sodium Carboxymethylcellulose |
| ASTM D1475 | ASTM | 斯坦dard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D149 | ASTM | 斯坦dard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies |
| ASTM D150 | ASTM | 斯坦dard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
| ASTM D1525 | ASTM | 塑料的VICAT软化温度的标准测试方法 |
| ASTM D153 | ASTM | 斯坦dard Test Methods for Specific Gravity of Pigments |
| ASTM D1599 | ASTM | 标准测试方法，可抵抗塑料管，油管和配件的短时液压 |
| ASTM D1613 | ASTM | 在油漆，清漆，漆和相关产品中使用的挥发性溶剂和化学中间体酸度的标准测试方法 |
| ASTM D1652 | ASTM | 环氧树脂环氧含量的标准测试方法 |
| ASTM D1708 | ASTM | 斯坦dard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
| ASTM D1709 | ASTM | 斯坦dard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
| ASTM D1722 | ASTM | 水溶性溶剂的水质混杂性标准测试方法 |
| ASTM D1762 | ASTM | 斯坦dard Test Method for Chemical Analysis of Wood Charcoal |
| ASTM D1876 | ASTM | 粘合剂剥离耐药性的标准测试方法（T-PEEL测试） |
| ASTM D1894 | ASTM | 斯坦dard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| ASTM D1907 | ASTM | 斯坦dard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method |
| ASTM D1922 | ASTM | 斯坦dard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
| ASTM D2007 | ASTM | 斯坦dard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method |
| ASTM D2116 | ASTM | 斯坦dard Specification for FEP Resin Molding and Extrusion Materials |
| ASTM D2122 | ASTM | 斯坦dard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings |
| ASTM D2137 | ASTM | 斯坦dard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D222 | ASTM | 斯坦dards and Specifications for Nonmetallic Minerals and Their Products |
| ASTM D2222 | ASTM | 斯坦dard Test Method for Methanol Extract of Vinyl Chloride Resins |
| ASTM D2236 | ASTM | 斯坦dard Method Of Test For Dynamic Mechanical Properties Of Plastics By Means Of A Torsional Pendulum |
| ASTM D2240 | ASTM | 斯坦dard Test Method for Rubber Property—Durometer Hardness |
| ASTM D2256 | ASTM | 斯坦dard Test Method for Tensile Properties of Yarns by the Single-Strand Method |
| ASTM D2393 | ASTM | Test Method for Viscosity of Epoxy Resins and Related Components *Withdrawn, No Replacement |
| ASTM D2425 | ASTM | 斯坦dard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry |
| ASTM D2515 | ASTM | 斯坦dard Specification for Kinematic Glass Viscometers |
| ASTM D256 | ASTM | 斯坦dard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM D257 | ASTM | 斯坦dard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D2709 | ASTM | 通过离心机中馏出燃料中水和沉积物的标准测试方法 |
| ASTM D2765 | ASTM | 斯坦dard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
| ASTM D2839 | ASTM | Use of a Melt Index Strand for Determining Density of Polyethylene |
| ASTM D2857 | ASTM | 斯坦dard Practice for Dilute Solution Viscosity of Polymers |
| ASTM D2887 | ASTM | 斯坦dard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography |
| ASTM D2896 | ASTM | 斯坦dard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D2902 | ASTM | 斯坦dard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM D1002 | ASTM | 斯坦dard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D3218-07 | ASTM | 多利单调纤维的标准规范 |
| ASTM D3278 | ASTM | 斯坦dard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| ASTM D3418 | ASTM | 通过差扫描量热法的过渡温度和聚合物结晶的过渡温度和焓的标准测试方法 |
| ASTM D3616-95 | ASTM | 斯坦dard Test Method for Rubber -- Determination of Gel, Swelling Index, and Dilute Solution Viscosity |
| ASTM D374-99 | ASTM | 斯坦dard Test Methods for Thickness of Solid Electrical Insulation |
| ASTM D3763 | ASTM | 斯坦dard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM D3828 | ASTM | 小型封闭杯测试仪的闪点标准测试方法 |
| ASTM D3835 | ASTM | 斯坦dard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer |
| ASTM D3849 | ASTM | 斯坦dard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy |
| ASTM D3895 | ASTM | 斯坦dard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
| ASTM D3985 | ASTM | 斯坦dard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor |
| ASTM D4017-02 | ASTM | 斯坦dard Test Method for Water in Paints and Paint Materals by Karl Fischer Method |
| ASTM D4052 | ASTM | 通过数字密度计的液体密度，相对密度和API重力的标准测试方法 |
| ASTM D4065 | ASTM | 斯坦dard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
| ASTM D412 | ASTM | 斯坦dard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D4176 | ASTM | 斯坦dard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
| ASTM D422 | ASTM | 斯坦dard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods) |
| ASTM D4274 | ASTM | 斯坦dard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols |
| ASTM D4441 | ASTM | 标准规范的水性分散体Polytetrafluoroethylene |
| ASTM D445 | ASTM | 透明和不透明液体运动学粘度的标准测试方法（以及动态粘度的计算） |
| ASTM D4488 | ASTM | 测试旨在用于弹性地板和可洗墙壁的产品清洁性能的标准指南 |
| ASTM D4603 | ASTM | 通过玻璃毛细管粘度计确定聚（乙二醇乙酸乙酯）（PET）固有粘度的标准测试方法 |
| ASTM D4662 | ASTM | 斯坦dard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols |
| ASTM D471 | ASTM | 橡胶特性的标准测试方法 - 液体的影响 |
| ASTM D473-07 | ASTM | 斯坦dard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
| ASTM D482 | ASTM | 斯坦dard Test Method for Ash from Petroleum Products |
| ASTM D4883 | ASTM | 斯坦dard Test Method for Density of Polyethylene by the Ultrasound Technique |
| ASTM D4980 | ASTM | 斯坦dard Test Methods for Screening of pH in Waste |
| ASTM D5035 | ASTM | 破碎力和伸长纺织织物的标准测试方法（条形方法） |
| ASTM D5155 | ASTM | 斯坦dard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
| ASTM D5225 | ASTM | 测量与差分粘度计的聚合物溶液粘度的标准测试方法 |
| ASTM D5227 | ASTM | 用于测量聚烯烃己烷可提取含量的标准测试方法 |
| ASTM D5292 | ASTM | 斯坦dard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy |
| ASTM D5296 | ASTM | 斯坦dard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
| ASTM D5386 | ASTM | 斯坦dard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D5470 | ASTM | 斯坦dard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials |
| ASTM D5492-10 | ASTM | 二甲苯年代测定的标准试验方法olubles in Propylene Plastics |
| ASTM D5511 | ASTM | 斯坦dard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ASTM D5527 | ASTM | 标准测试方法，用于测量己烷可提取含量。 |
| ASTM D5594 | ASTM | 斯坦dard Test Method for Determination og the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
| ASTM D56 | ASTM | 斯坦dard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D5630 | ASTM | 塑料中灰分含量的标准测试方法 |
| ASTM D570 | ASTM | 塑料吸水的标准测试方法 |
| ASTM D5736 | ASTM | 斯坦dard Test Method for Thickness of Highloft Nonwoven Fabrics (Withdrawn 2008) |
| ASTM D5739 | ASTM | 斯坦dard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry |
| ASTM D575 | ASTM | 斯坦dard Test Methods for Rubber Properties in Compression |
| ASTM D5845 | ASTM | 斯坦dard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy |
| ASTM D5868 | ASTM | 斯坦dard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D5946 | ASTM | 斯坦dard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements |
| ASTM D6110 | ASTM | 斯坦dard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics |
| ASTM D6130 | ASTM | 通过电感耦合等离子体原子发射光谱测定发动机冷却剂中硅和其他元件的标准测试方法 |
| ASTM D624 | ASTM | 斯坦dard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D6271-04 | ASTM | 斯坦dard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol |
| ASTM D6304 | ASTM | 斯坦dard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
| ASTM D6370-99 | ASTM | 斯坦dard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
| ASTM D638 | ASTM | 斯坦dard Test Method for Tensile Properties of Plastics |
| ASTM D6417 | ASTM | 斯坦dard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography |
| ASTM D6474-12 | ASTM | 斯坦dard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
| ASTM D648 | ASTM | 斯坦dard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D6556-10 | ASTM | 斯坦dard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D6730 | ASTM | 标准测试方法，用于确定火花点火发动机燃料中的单个组件，通过100米毛细管（带有预列）高分辨率气相色谱 |
| ASTM D6845 -12 | ASTM | 斯坦dard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D6869 | ASTM | 斯坦dard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) |
| ASTM D695 | ASTM | 斯坦dard Test Method for Compressive Properties of Rigid Plastics |
| ASTM D7028 | ASTM | 通过动态机械分析（DMA）的聚合物基质复合材料玻璃过渡温度（DMA TG）的标准测试方法 |
| ASTM D7169 | ASTM | 斯坦dard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography |
| ASTM D7252 | ASTM | 斯坦dard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates |
| ASTM D7253-06 | ASTM | 斯坦dard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols |
| ASTM D7271-06 | ASTM | 使用振荡性的流变仪的标准测试方法 |
| ASTM D7334 | ASTM | 斯坦dard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement |
| ASTM D7359 | ASTM | 斯坦dard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
| ASTM D7371 | ASTM | 斯坦dard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method) |
| ASTM D7394-18 | ASTM | 使用三个旋转台式粘度计对建筑涂料进行流变特征的标准实践 |
| ASTM D7409 | ASTM | 斯坦dard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
| ASTM D7419-07 | ASTM | 斯坦dard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection |
| ASTM D746 | ASTM | 斯坦dard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D7771 | ASTM | 斯坦dard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black |
| ASTM D7823 | ASTM | 标准测试方法，用于通过热解呼吸（乙烯基氯化物）塑料中低水平的邻苯二甲酸盐 - AGAS色谱/质谱法 |
| ASTM D7836-13 | ASTM | 斯坦dard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials |
| ASTM D789 | ASTM | 斯坦dard Test Methods for Determination of Solution Viscosities of Polyamide (PA) |
| ASTM D790 | ASTM | 斯坦dard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D792 | ASTM | 斯坦dard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM D86 | ASTM | 在大气压下石油产品和液体燃料蒸馏的标准测试方法 |
| ASTM D865 | ASTM | 斯坦dard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D882 | ASTM | 薄塑料板的拉伸特性的标准测试方法 |
| ASTM D903 | ASTM | 斯坦dard Test Method for Peel or Stripping Strength of Adhesive Bonds |
| ASTM D92 | ASTM | 斯坦dard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
| ASTM D93 | ASTM | 斯坦dard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester |
| ASTM D94 | ASTM | 斯坦dard Test Methods for Saponification Number of Petroleum Products |
| ASTM D974 | ASTM | 斯坦dard Test Method for Acid and Base Number by Color-Indicator Titration |
| ASTM E 1147 | ASTM | 斯坦dard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography (Withdrawn 2013) *Withdrawn, No Replacement |
| ASTM E1064 | ASTM | 斯坦dard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM E1131 | ASTM | 斯坦dard Test Method for Compositional Analysis by Thermogravimetry |
| ASTM E1147 | ASTM | 斯坦dard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography (Withdrawn 2013) *Withdrawn, No Replacement |
| ASTM E1226 | ASTM | 斯坦dard Test Method for Explosibility of Dust Clouds |
| ASTM E1269 | ASTM | 标准测试方法，用于通过差扫描量热法确定特定的热容量 |
| ASTM E1530 | ASTM | 斯坦dard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique |
| ASTM E1615 | ASTM | 斯坦dard Test Method for Iron in Trace Quantities Using the FerroZine Method |
| ASTM E1868 | ASTM | 斯坦dard Test Method for Loss-On-Drying by Thermogravimetry |
| ASTM E1899 | ASTM | 斯坦dard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide |
| ASTM E1952 | ASTM | 通过调制温度差扫描量热法的导热率和热扩散率的标准测试方法 |
| ASTM E202 | ASTM | 斯坦dard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols |
| ASTM E2160 | ASTM | 斯坦dard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry |
| ASTM E2193 | ASTM | 单乙二醇的紫外线透射率的标准测试方法（使用紫外分光光度计计） |
| ASTM E222 | ASTM | 斯坦dard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation |
| ASTM E2313 | ASTM | 单，二 - 和三乙二醇中醛的标准测试方法（使用分光光度法） |
| ASTM E2409 | ASTM | 斯坦dard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method) |
| ASTM E2469 | ASTM | 斯坦dard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography |
| ASTM E2550 -11 | ASTM | 斯坦dard Test Method for Thermal Stability by Thermogravimetry |
| ASTM E2716 | ASTM | 斯坦dard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry |
| ASTM E308 | ASTM | 斯坦dard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM E321 | ASTM | 斯坦dard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method) |
| ASTM E398 | ASTM | 斯坦dard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement |
| ASTM E659 | ASTM | 化学品自动定位温度的标准测试方法 |
| ASTM E681 | ASTM | 斯坦dard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) |
| ASTM E711 | ASTM | 斯坦dard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
| ASTM E8 | ASTM | 斯坦dard Test Methods forTension Testing of Metallic Materials |
| ASTM E831 | ASTM | 斯坦dard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
| ASTM E84 | ASTM | 斯坦dard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E86 | ASTM | Methods for Chemical Analysis of Antimony (Withdrawn 1983) *Withdrawn, No Replacement |
| ASTM E96 | ASTM | 斯坦dard Test Methods for Water Vapor Transmission of Materials |
| ASTM F1249 | ASTM | 斯坦dard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor |
| ASTM F1349-08 | ASTM | 斯坦dard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors |
| ASTM F1927 | ASTM | 斯坦dard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector |
| ASTM F1980 | ASTM | 斯坦dard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices |
| ASTM F2024 | ASTM | 斯坦dard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings |
| ASTM F2214-02 | ASTM | 原位测定的标准试验方法Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) |
| ASTM F2602-08 | ASTM | 斯坦dard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS) |
| ASTM F2902 | ASTM | 斯坦dard Guide for Assessment of Absorbable Polymeric Implants |
| ASTM F312 | ASTM | 斯坦dard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters |
| ASTM F88 | ASTM | 柔性屏障材料密封强度的标准测试方法 |
